PRODUCT SPOTLIGHT | PURE WATER CLEANING
If you’re serious about spotless results — whether you’re washing high-rise windows, scrubbing solar panels, or maintaining commercial properties — there’s a smarter way to work. Meet the Unger HydroPower® Nano Pure Water System.
Pure water cleaning has become the gold standard for professional window cleaners, solar panel technicians, and facility maintenance crews — and for good reason. When water is purified to near-zero mineral content, it dries completely clear, leaving no spots, streaks, or residue behind. No squeegees. No chemicals. No callbacks.
The Unger HydroPower Nano takes this proven technology further with a next-generation triple-stage filtration system that’s built for high-performance, all-day use in the field.
Triple-Stage Filtration: Cleaner Water, Better Results
What sets the HydroPower Nano apart is its three-stage approach to water purification — each stage targeting a different category of impurity:
- Pre-filter: Removes sediment, dirt, and larger particles before water reaches the membrane.
- Nano-membrane: Uses nanofiltration technology to strip out dissolved minerals, chlorine, and contaminants.
- DI Resin Unit: A deionization stage that polishes the water to near-zero TDS (Total Dissolved Solids), ensuring a perfectly spot-free finish.
The result is ultra-pure water that evaporates cleanly from any surface — glass, solar panels, stainless steel, or frames — without leaving mineral deposits or watermarks.
No Power Required — Runs on Water Pressure Alone
One of the most compelling features of the HydroPower Nano is its completely energy-free operation. The system runs entirely on standard water pressure — no electricity, no batteries, no generator required. That means lower operating costs, simpler logistics, and the freedom to work anywhere you have a hose connection.
At 60 PSI, the system delivers a flow rate of up to 1.5 gallons per minute (5.68 liters/min) — enough to support a productive, full-day cleaning schedule without bottlenecks.
Smarter Water Use: 10% Less Waste Than Traditional RO Systems
Traditional reverse osmosis (RO) systems are notoriously water-hungry — often sending three to four gallons down the drain for every gallon of purified water produced. The HydroPower Nano’s advanced nanofiltration membrane significantly reduces this waste, using 10% less wastewater than comparable RO units.
For businesses operating in high-TDS water areas — where standard filtration struggles and DI resin burns through quickly — this efficiency is especially valuable. The nano-membrane does the heavy lifting first, protecting and extending the life of the DI resin that follows.
The Flow Optimizer Dial: Extend Resin Life Up to 4x
DI resin is one of the ongoing costs in any pure water cleaning operation. The HydroPower Nano addresses this directly with its built-in Flow Optimizer Dial, which lets you balance water pressure and resin usage in real time.
By fine-tuning the flow, you can extend resin life by up to four times compared to unregulated systems — a significant cost saving over months and years of operation. Pair that with the built-in TDS meter, and you always know exactly where your water quality stands before you put brush to glass.
Built for the Field: Portable, Durable, and Practical
The HydroPower Nano was designed with real-world use in mind. Its compact stainless steel frame (26.5″ L × 20″ W × 48″ H) rolls easily on large wheels built to handle rough terrain — gravel driveways, curbs, uneven pavement. At 75 lbs (complete), it’s substantial but manageable, with a form factor built for transport and storage in a service vehicle.
A few standout features for field crews:
- Integrated pole straps secure up to two cleaning poles directly to the unit, keeping everything organized and eliminating extra trips to the van.
- Built-in TDS meter gives instant water quality readouts so you’re never guessing whether your output is clean enough.
- Multilingual resources including manuals in English, French, and Spanish, plus video demonstrations and a filter replacement schedule for easy maintenance.
Who Is It For?
The HydroPower Nano is the right tool for professionals who need consistent, repeatable pure water performance across a variety of job types:
- Commercial and residential window cleaning companies
- High-rise and multi-story building maintenance crews
- Solar panel cleaning operations
- Facility and property management services
- Anyone working in high-TDS water areas where standard DI-only systems are too costly to run
The Bottom Line
The Unger HydroPower Nano Pure Water System combines nanofiltration, deionization, and smart engineering into a package that genuinely reduces operating costs, improves cleaning quality, and holds up in real working conditions. If your team is ready to move beyond traditional methods — or upgrade from an aging RO system — the Nano is worth a serious look.
Why Choose Chemcraft Industries?
With nearly 80 years of experience serving Chicago-area businesses, Chemcraft Industries isn’t just a supplier — we’re a facility maintenance partner you can count on. Since 1947, we’ve helped schools, healthcare facilities, municipalities, hotels, and commercial businesses of all sizes find the right cleaning supplies and equipment to get the job done right, without overspending. Our approach goes beyond the transaction: we work with you to identify the lowest total cost solution for your facility, balancing product quality, efficiency, and long-term value. Whether you need janitorial chemicals, floor care equipment, restroom essentials, or specialty tools like the Unger HydroPower® Nano, we have the expertise and the product lineup to back it up. Ready to see our products in action? Contact us today to schedule a complimentary product demonstration and discover how Chemcraft can help your facility run cleaner, smarter, and more efficiently.